| SPECIFICATION |
| Physical Form |
: |
Industrial Spray |
 |
| Base |
: |
Polyurethane Based Solvent |
| Odors |
: |
Predominantly Cationic |
| Solvent |
: |
Kationic solvent |
| Viscosity @ 25°C |
: |
800-950 cps |
| Tack Time |
: |
15 -30 Minutes |
| Typical Specific Gravity |
: |
0.82 – 0.85 |
| Flammability |
: |
Flammable |
| Packing |
: |
25 Ltr. |
|
| |
Polystick PU 4040 works excellent with other polymers like TPR, EVA, PVC & synthetic fabric uppers. |
| |
| Instruction for application : |
Apply the thin line of adhesive on both the surfaces to be bonded. The surfaces to be bonded should be free from impurities like grease, dust and oil. Then both surfaces should be kept for minimum 15 minutes in the open atmosphere so that all the solvents should evaporate. The two substrates are then bonded with a uniform pressure after heat activation at 70°C. Final peel strength of bonding is visual after 24 hours. |
| |
| RECOMMENDED FOR USE : |
The Containers should be tightly packed so as to keep airtight.
The products should be stirred properly before its application. |
| |
| Precaution: |
| This is highly inflammable in nature & lid should be replaced after its partial usage. Proper suitable protective clothes & safety goggles for eyes protection should be used by the person handling the work. Adhesive mixed with cross linking agents has a very limited pot life, so it should be mixed as per the actual requirement. |
| |
| STORAGE CONDITION : |
| The adhesive containers should be kept in a shed so as to avoid direct sunlight. The product should be kept in a cool & dry place. The temperature of a covered placed should be maintained between 10°C to 40°C. These products should be stored in a flame proof area. |
|
 |
|
| |
| Note: We hereby intimate that before applying our product in full length of production,the customer is instructed to test in his own way to determine the suitability of the products for his specific use under his operating conditions. As the circumstances under which our products are stored,handled and used,are beyond our control on account of which we cannot assume any responsibility for their use by the customer. |
