 |
| SPECIFICATION |
| Ingredients |
: |
Mixture of Hydrocarbons & Petroleum solvent |
 |
| Auto Ignition Temperature |
: |
185-190 degree centigrade |
| Clarity |
: |
Hazy |
| Viscosity |
: |
1200 – 1700cps |
| Tack Time |
: |
20 – 30 Minutes |
| Typical Specific Gravity |
: |
0.83 – 0.85 |
| Flammability |
: |
Highly inflammable |
| Packing |
: |
25 Liters |
|
| CHARACTERISTICS OF THE PRODUCTS : |
| Polystick SR 7575 rubber based adhesives posses outstanding bonding strength together with high peel value. They are widely acclaimed by our clients for their bond strength, excellent low creep properties and cohesive strength. Our Polystick SR 7575 is an ideal contact based adhesive recommended for various applications in the bonding of wood, plywood, laminates, board etc. Polystick SR 7575 is used in the automobile industry in the fixing of upholstery. It is also used in the bonding of glass papers and in the luggage industry for the adhesion of interior fabric. Polystick SR 7575 is extremely useful for bonding in mattresses made out of Rubber Foam, Coir and Sponge (U-Foam), as well as for bonding other soft surfaces. |
|
| |
| INSTRUCTION FOR APPLICATION : |
| Surface of the bonded product should be cleaned and free of dust, grease or moisture. Care should be taken while using porous surface like boards where adhesive is absorbed leaving a non tacky surface. Application of adhesive can be done via brush or pressing tools. Bonding at the right time and the heavy pressure on both the surface after application provides a best adhesion. |
| |
| RECOMMENDED FOR USE : |
The Containers should be tightly packed so as to keep airtight.
The products should be stirred properly before its application. |
| |
| STORAGE CONDITION : |
| The adhesive containers should be kept in a shed so as to avoid direct sunlight. The temperature of a covered placed should be maintained between 10°C to 40°C. These products should be stored in a flame proof area. |
|
 |
|
| |
| Note: We hereby intimate that before applying our product in full length of production,the customer is instructed to test in his own way to determine the suitability of the products for his specific use under his operating conditions. As the circumstances under which our products are stored,handled and used,are beyond our control on account of which we cannot assume any responsibility for their use by the customer. |
|
 |
|
